Fog Machine

Fog Machine

Simple Laser Experiments to Share With your Kids

The word "LASER" stands for Light Amplification by Stimulated Emission of Radiation. A laser is an optical Light Source that emits a concentrated beam of photons. Lasers are usually monochromatic – the light that shoots out is usually one wavelength and color, and is in a narrow beam.
By contrast, light from a regular incandescent Light Bulb covers the entire spectrum as well as scatters all over the room. (Which is good, because could you light up a room with a narrow beam of light?)
There are about a hundred different types of atoms in the entire universe, and they are always vibrating, moving, and rotating. Think of kids on sugar. When you add energy to these atoms (even more sugar to the kids), they really get excited and bounce all over the place.
When the atoms relax back down to their "normal" state, they emit a photon (a light particle). Think of the kids as coming down from their sugar high, and they all collapse on the couch.
A laser controls the way energized atoms release photons. Imagine giving half the kids sugar, and picture how they would bounce all over the place (like light from a bulb)when it took effect. They would be very high-energy among the other half who were contently sitting down.
Now imagine those sugar kids jumping in unison (a focused laser beam). The sugar-kids are infectious, and pretty soon, the kids around them are joining in and sharing in their excited energy. This is how a laser charges the atoms inside the gas medium.
Now imagine a cat-flap that lets out a limited number of kids out at a time, while the rest are bouncing around inside, charging up everyone. That cat-flap exit is the laser beam exiting the laser. The atoms remaining inside the laser bounce off mirrors as they charge each other up.
Before we start, you'll need eye protection – tinted UV ski goggles are great to use, as are large-framed sunglasses, but understand that these methods of eye protection will not protect your eyes from a direct beam. They are intended as a general safety precaution against laser beam scatter and spinning mirrors. (Yes, you will be wearing sunglasses in the dark!)
A very neat addition to the experiments below is a fog machine. (Rent one from your local party supply store.) Turn it on, be sure you have good ventilation, darken the lights, and turn on the lasers for an outstanding laser experience!
A quick note about lasers: keychain lasers from the dollar store work just fine with these projects. Do not use the green lasers sold in astronomy stores – they are too dangerous for the eyes.
Plastic Bottle Beam Fill up a plastic water or clean soda bottle with water and add a sprinkle of cornstarch. Turn down the lights and turn up the laser, aiming the beam through the bottle. Do you see the original beam in the bottle? Can you find the reflection beam and the pass-through beam?
Light Bulb Laser In the dark, aim your laser at a frosted incandescent light bulb. The bulb will glow and have several internal reflections! What other types of Light Bulbs work well?
CDs Shine your beam over the surface of an old CD or DVD. Does it work better with a scratched or smoother surface? You should see between 5-13 reflections off the surface of the CD, depending on where you shine it and how good your "seeing" conditions are.
Glass and Crystal Pass the laser beam through several cut-crystal objects such as wine glasses or clear glass vases. Is there a difference between clear plastic or glass, smooth or multi-faceted? Try an ice cube, both frosted and wet.
Microscope Slides Shine the laser beam through a flat piece of glass, such as a microscope slide or single-paned window. Can you find the pass-through beam as well as a reflected beam?
If you have it, fill a clear tank with water, add a sprinkling of cornstarch, and put the slide underwater. Shine the laser through the side wall through the slide and both beams will be visible.
Lenses If you have an old pair of eyeglasses, pop out the lenses and try one or both in the beam to see the various effects. Try one lens, and then try two in line with each other to see if you can change the beam.
Filters Paint a piece of cellophane or stiff clear plastic with nail polish (or use colored filers) to put in the laser beam. You can make a quick diffraction grating by using a feather in the beam.
If you have polarizer filters, use two. You can substitute two sunglass lenses – no need to pop out the lenses – you can just use two pairs of sunglasses. Just make sure they are polarized lenses (most UV sunglasses are). Place both lenses in the beam and rotate one 90 degrees. The lenses should block the light completely in one configuration and allow it to pass-through the other way.
Laser Maze Hot glue one 1" mosaic mirror (found at most craft stores) to each wooden cube. In a pinch, you can use aluminum foil or Mylar. Add a fog source, such as a fog machine, dry ice, or clap two (very chalky) chalkboard erasers together – just be sure to have proper ventilation, as you will also need the room to be very dark. Turn on the laser adjust the cubes to aim the beam onto the next mirror.
_____________________________________________________________
As a teacher, engineer and university instructor Aurora Lipper has been helping kids learn science for over a decade.

Want More Cool Science Activities?
Rocket-launch your kid’s education by downloading your free copy of the Science Experiment Activity Guide from the Supercharged Science website: www.SuperchargedScience.com

About the Author

By Aurora Lipper
_____________________________________________________________
As a teacher, engineer and university instructor Aurora Lipper has been helping kids learn science for over a decade.

Want More Cool Science Activities?
Rocket-launch your kid’s education by downloading your free copy of the Science Experiment Activity Guide from the Supercharged Science website: www.SuperchargedScience.com

can I use a fog machine and put in snow fluids to make real snow?

I bought a fog machine for halloween which I only used once for my halloween party and I want to use it again to make snow for my christmas party. I noticed the Snow Machine looks just like my fog machine and I dont want to spend any money buying a snow machine. SO my question is can I use my fog machine and buy snow fluids to make snow?

No, ma'am. Those are two totally different machines that use WAAAAAY different "juices". You're likely to burn up and ruin your fog machine if you do that. You can call "Robert" at Effect Lighting, 813-818-7000 (Tampa, Florida) to order snow juice in concentrate form. Unlike some brands, you can mix his concentrate with TAP WATER, not "special" water you can't hardly find anyway. I don't work with Robert, but he was recommended by the customer service reps at Chauvet (makers of snow, fog and bubble machines). I'd be willing to bet he can get you a decent snow machine at a resonable price, too. Hope that answers your question. Good luck with the Christmas party! I'm going to be using my snow machine for my front yard display this year. I'm hoping to win the neighborhood's decorating contest! LOL.

ps. If you talk to Robert, tell him the guy in Texas with the "snowing snowman that doesn't work" gave you his number. 80)
Regards.

How a Fog Machine Works